Error while upgrading from AX 2009 to AX 2012 R3

This topic contains 2 replies, has 3 voices, and was last updated by  Locus IT 1 year ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #20674

    Andrew Jenson
    Participant

    I am experiencing following error at “”Detect code upgrade conflicts”” step of “”Code upgrade (layer specific, required for each customized layer)”” checklist. I checked event viewer but did not find any helpful message from there.

    Faulting application name: Ax32.exe, version: 6.3.1000.309, time stamp: 0x546925bc
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x2ac64cb9
    Faulting process id: 0x2cac
    Faulting application start time: 0x01d0ae15c50b9185
    Faulting application path: C:\Program Files (x86)\Microsoft Dynamics AX\60\Client\Bin\Ax32.exe
    Faulting module path: unknown
    Report Id: 64ff8bb1-1a09-11e5-bc86-00155d006a64

    I am upgrading from AX 2009 to AX 2012 R3 which is installed on Winder Server 2008 R2. Has anyone experienced such issue before?

    #20992

    Locus IT
    Participant

    Hello Andrew,

    I think you may have already figured out from where the error is coming from. I saw that it is coming from \Classes\SysUpgradeConflictDetectorBP\new method. I wrote the following code in a job and I am not getting this issue:

    static void Job72(Args _args)

    {

    SysCompilerOutput sysCompilerOutput;

    xCompilerOutput compilerOutput = infolog.compilerOutput();

    if (compilerOutput is SysCompilerOutput)

    {

    sysCompilerOutput = compilerOutput;

    }

    else

    {

    info(“@SYS105123”);

    }

    }

    Try to run the above code inside X++ job and see if you are getting error. This may give you some clue.

    #20682

    Paul
    Participant

    Have you checked the compiler output settings under Tools -> Options -> Development tab -> Compiler button? Just wondering if you need to select one of the parameter for Output under Compiler setup form.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Skip to toolbar